A UHF wavelength is also shorter than their VHF counterparts which means their broadcast elements are shorter as well. Connecting to these channels requires a specific UHF antenna that allows it to get the right amount of amplification. Because the UHF signal has a shorter wavelength of around 28 inches, the signals can actually pass through obstructions better to give a clearer picture.
Very high frequency is the type of radio frequency electromagnetic waves that range from 30 to MHz. These days, UHF is more common for a television connection and most broadcasters will use this or digital signals.
Another reason why VHF remained popular for so long was due to the aforementioned efficiency when inducing a current which meant they were less likely to suffer from interference. VHF is the superior choice for signal today, as the technology has improved its capabilities and antennas made for this purpose have also evolved.
Most direct to air channels have both a VHF and digital allocation so that people with different TVs and setups are able to access whichever one they need. Generally, our bowtie antennas can receive high-VHF broadcasts. However, if the VHF signals in your area are weak or are transmitting from a tower more than 20 miles from your home, a longer-range VHF antenna may be necessary to ensure reception of all your available local stations.
It should also be noted that while the ClearStream 5 can be combined with your new or existing UHF antenna, many of our customers report that they successfully receive consistent UHF signals as well as their local high-VHF channels with the ClearStream 5 alone.
If you need any assistance deciding what types of materials you may need or have any questions about your installation, contact our Connection Crew , available 7 days a week. Before permanently attaching an antenna to any surface, TEST reception in that area.
Connect coaxial cable to the F-connector on the antenna. There are a lot of types of antennas that are often used for specific applications and are well suited to match it. Simply put, each of these two are suited to receive or transmit signals at specific frequencies. Because of that, you should know what frequency your device works at in order to get the right type of antenna, as the wrong type of antenna attached would result to no benefit.
This is because VHF signals have a lower frequency which directly translates to a longer wavelength. When calculating for the length of elements in an antenna, the wavelength is the prime consideration. You are then able to create complex configurations with UHF antennas without making it too large or too unmanageable.
Channels 2 to 13 are within the frequency spectrum of VHF while channels 14 to 51 are within the frequency range of UHF. Having a UHF antenna gives you the greatest number of channels, but not all of them. Though, this might be enough for most people, there is still a way to get all the channels. This is especially true with UHF antennas as the very wide range of frequencies means that some antennas might not work as good as you expect with certain hardware, even though they are both within the UHF range.
0コメント